KMC CORP
division of GPI GROUP
ALSA Australia and New Zealand

Traditional color-changing paints create a swirl of different colors when you look at them from different angles. SpectraFX is different from these paints in that it creates a true "chameleon" color shift from 1 distinct color to another. This controlled color shift creates a much more dramatic effect, so that 2 people looking at the same object will see two completely different colors.

This dramatic color shift is the result of special, patented crystal flakes instead of color pigments used in traditional color-changing paints. And Alsa has put the creative control of these amazing crystal flakes in the consumers hands, by selling the flakes themselves instead of pre-mixed paints. So you are free to add them to any type of clear paint or coating you would like and you can also adjust the amount of flakes used to change effects.

And, by selling the flakes instead of pre-mixed paints Alsa is able to pass along significant savings to its customers. So your favorite clear paint or coating enhanced by SpectraFX flakes ends up costing a fraction of the price of other color changing paints, which can run thousands of dollars per gallon.

Please read more about the versatility of SpectraFX in the Application Guide and browse through our Product Showcase to see examples of the creative designs produced by this captivating paint.

SpectraFX can be applied to products in many ways, including:

• Sprayed On
• Rolled On
• Silk Screening
• Injection Molded
• Extruded
• Applied like Printing Ink
• Brushed On With Typical Paint Brushes
• Powder Coated
• Air Brushed

Creating your own SpectraFX paint is as simple as mixing in flakes to the clear paint or coating of your choice. The flakes will lay down evenly and won't clump up in any type of paint as long as you follow the directions on the can. And the intensity of the color flop can be controlled by simply adding more or less flakes.

Step 1.- Prep and basecoat your piece as you would any other paintjob.

Step 2. - Mix SpectraFX at a ratio of 1 gr. per ounce of liquid using an inner coat clear, color blender, or even your final clear. 1 gr. per ounce will yield a high concentration of SpectraFX using more than this can actually decrease the overall look. However using less even ¼ to ½ gr. per ounce will still produce dramatic color change effects. (Try mixing various ratios and spraying them on sample panels until desired effects are achieved.)

Step 3.- Apply SpectrFX with one wet or two medium coats. (Again take caution here as to much will deaden the overall effect.)

Step 4.- Allow to dry before clearing with a poly-urethane clear or your choice of topcoats.

Q. Is SpectraFX a paint?

A. Again here is where the versatility of SpectraFX shines. Depending on what color basecoat you choose to put it over you may want to use just a small amount, (for example 1 gr. per 5ounces of carrier.) However for the hardest or most radical flops we recommend using 1 gr. per ounce of carrier at this ratio only one coat is needed for complete coverage.

NOTE! When adding to injection molding you will need about 5% by volume.