Description:
The ChromeFX™ (US Pat. #4,975,305) Basecoat is a solvent based, 2-component spray applied coating that forms a smooth reactive base for the ChromeFX™ (US Pat. #4,975,305) Intermediate “chrome” layer. It can be used without additional primer on most non-porous surfaces.

Product Data:
Pigment / Binder: Acrylic resin
Solvents: Aromatic hydrocarbons
Fire Hazard: Flammable
Flash point: 27° C or 80°F
Coverage: 400 sq. Ft/ gallon @ 1 mil
Substrates: Plastic or metal
Color: White
Shelf Life: 1 Year Unopened
Pot Life: 4 Hours @ ambient conditions.

Application:

• Cleaning: All parts must be chemically or mechanically cleaned, film free, by a recognized cleaning specification.
• Pre-treatment:
  • Plastics: Use adhesion promoter recommended by substrate manufacturer to improve adhesion.
  • Porous Surfaces: Apply a primer/sealer. Inquire about ChromeFX™ water based primer for Styrofoam and other porous plastics.
• Hardener: ChromeFX™ Hardener H67
• Mixing ratio by volume: Basecoat - 4 Parts / Hardener - 1 Part
• Application Methods: Conventional or HVLP spray
  Recommended dry film thickness: 1.0 mil
  

DO NOT TOUCH PART AFTER PRODUCT APPLICATION.
Hand oils cause defects in intermediate coat.

Drying:
Air Dry: 48 hours
Forced Drying: 8-10 hour at 50°C (130°F). Metals and high temperature plastics can use higher temperatures.

Storage:
Store at ambient conditions and away from open flame.

Safety Precautions:
Please refer to the Material Safety Data Sheet.