Pla-Stick is designed to create a bond for painting substrates such as Polypropylene, Polypropylene/Elastomer Blends, Polyethylene, TPO and others. Pla-Stick is clear in color, ready to spray (no mixing required) and extremely easy to apply; dries in 2 to 3 minutes. |
|
| |
| |
———————————————————————————————————————
|
|
|
|
|
|
|
|
|
|
 |
Pla-Stick |
Quantity |
Item Code |
Price |
1 Quart |
KCPS1Q |
A$135.40 EX. GST. |
1 Gallon |
KCPS1G |
A$TBA
|
|
|
|
|
KILLER Pla-Stick IN A CAN |
Quantity |
Item No. |
Price |
400 ml. |
KCKCPS |
A$75.20 EX. GST. |
|
|
| FOR PROFESSIONAL USE ONLY: USE WITH A NIOSH APPROVED MASK IN A WELL VENTILATED AREA |
|
|
|
|
|
|
|
|
———————————————————————————————————————
Back to Top |
|
| |
|
Color Blender mixed with Candy Concentrate and mixed with Reducer |
Color Blender mixed with Candy Concentrate and mixed with Reducer |
Chrysler PT Cruiser |
Chrysler PT Cruiser
|
Chrysler PT Cruiser
|
VW Passat |
|
———————————————————————————————————————
Back to Top |
|
How to Apply Pla-Stick:
|
Step 1.- Clean substrate of all contamination, such as grease, dirt and oils using isopropyl alcohol/detergent or other appropriate cleaning solutions
Step 2.- Pla-Stick is ready to spray as packaged, no reduction is needed. Apply one medium coat of Pla-Stick with a dry film thickness of 0.1 to 0.2 mils using standard spray equipment.
NOTE: Proper coat thickness is critical for good adhesion properties. With adhesion promoters, more is not better. Carefully monitor coat thickness. Basecoats or primers may be applied immediately after the Pla-Stick coat has dried, usually within 2 to 3 minutes at temperatures 70° F or above. Pla-Stick acts as an adhesive to the plastic providing a bond.
Step 3.- Clean equipment thoroughly with thinner. |
|
|
|
|
|
|
|
|
In order to view our Technical Data Sheets and Material Safety Data Sheets, you will need to have Adobe Reader, which is free, easy to use, and can be downloaded by clicking  on the link below. |
*NOTE: Pop-Up Blockers MUST be Turned off to view these pages |
|
| |
| ** Warning: Pla-Stick paint is highly flammable. Please take care in storing and applying it away from open flame or high heats. It is also poisonous if ingested, so please store it away from children. |
|
|
———————————————————————————————————————
Back to Top |
